Categories
Projects Tools

Zero-clearance insert for Bosch GTS 10 XC

The main function of the zero-clearance insert is to prevent tear-out on the bottom edge of the piece . Especially in plywood the bottom edge will be ripped in crosscuts. CAD drawings and a 3d model are available in the CAD drawings page. I used 12 mm birch plywood for the insert. The depth of […]

Categories
Tool Wall

Sanding paper shelves

This is designed for 150 mm round sanding papers. Each sanding grit can be store in several shelves. Drawings in DWG format can be found there. I am using a Mirka Ceros 650CV random orbital sander which has 150 mm backing pad. I have been very pleased about this purchase. By using Mirka Abranets with […]

Categories
Projects Tool Wall Tools

Tool wall by using the french cleat system

My new workshop needs a proper system to keep my tools well-organized and I chosen to build one with the french cleat system. The system itself is very simple it’s just be consisted with a beveled batten mounted on the wall and a similar rail on the cabin. The sharp edge of the cabin rail […]

Categories
Projects Tool Wall

Power station

The power station is designed for my cordless tool batteries. There is space for ten Bosch 12 volt batteries and five Makita 18 volt batteries. The bottom stand is for battery chargers and the top stand for miscellaneous stuff related to tool batteries. This is a part of my tool wall project which will organize […]